Ap Bio Fingerprinting Lab Answers

Project Ruckers, keyboard

First I glued the blocks that will form the keyboard and those that will form the soundboard.
on the table that will form the keyboard then I drew the lines that serve as a guide to separate the various buttons.
Then I set the bar poplar that will guide the tail of the keys on the keyboard, simultaneously marking the tail of the key and future guidance. In this way, when they stuck the tips of the guide button, they will be aligned with the guide slots.

The guide is easier to do than it appears. The cracks have triangular section, which seems difficult, but really just do first of all a small cut on the drawn line to score, so you have a support for the saw.

Then with the saw you make two diagonal cuts. The angle is established by eye, do not need a precision. The wood that remains between the two cuts you knock it out with a chisel, the rest is always clean with a chisel and a few shots of file.
The frame is fairly simple to assemble. At the time the two sides are still a bit 'too long, and the balance bar has yet to reach its final form, which will be given with a plane.